Jan 4 2014
Learn 3D Printing at Deezmaker

Learn 3D Printing at Deezmaker

Learn 3D Printing – Going Zero to Plastic in an afternoon
Deezmaker 3D Printers & Hackerspace
Saturday, January 25, 2014 from 1:00 PM to 6:00 PM (PST)
Pasadena, CA

This Sunday (Jan 5th) is our Monthly Meet Up at Deezmaker.
It’s time again for our monthly meeting of 3D printing enthusiasts. Want to see what this is all about? Make it your New Year’s resolution to drop by. Come and drop in on Sunday, January 5, 2014 anytime from noon to 5 PM at the Deezmaker shop at 290 N. Hill Ave in Pasadena.  We have an open meeting on the first Sunday of every month. If you can’t make it this month, the next two will be on February 2nd (Groundhog Day!) and March 2nd.

You are also invited to register for:

Learn 3D Printing – Going Zero to Plastic in an afternoon

Saturday, January 25, 2014 from 1:00 PM6:00 PM

Register for Event
Have you been wondering what this 3-D printing excitement is all about?Spend an afternoon at Deezmaker Hackerspace in Pasadena, makers of the Bukobot and Bukito 3-D printer. You will learn how to download and use all the relevant free open source software you need to use a 3-D printer.Open-source 3D printing requires use of two programs: a 3-D modeling program to lay out the desired model, and a program to convert that design into the commands for the printer (which runs on “G-code”).The class will be taught by Diego Porqueras, creator of the Bukobot and President of Deezmaker, and other Deezmaker staff.  The class will cover the history of 3-D printing and its relationship to the open source movement; basics of OpenSCAD free 3-D modeling software, and use of a common G-code generator.  Participants will make something cool!

The class will run from 1 PM to 6 PM on Saturday January 25 at the Deezmaker Store and Hackerspace in Pasadena, 290 N. Hill Ave.

Each participant must bring their own laptop computer (Mac, Windows, Linux).

Participants will be sent a list of open-source free software to download ahead of time to make the most efficient use of class time. The class will focus on the specific settings for a Bukobot, but the material applies broadly to all RepRap style open source based printers.

Deezmaker 3D Printers and Hackerspace in Pasadena, CA
290 N. Hill Ave.
Suite #5
Pasadena, CA 91106
Attend Event

Share

Written by

View all posts by: